DAYBETTER is a company that focuses on creating the lighting experiences by constantly pursuing high-quality products and being endlessly innovative. DAYBETTER products are the result of our industry-leading research & development, manufacturing, and sales departments, and our mission to make your life more colorful indoors.
Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events.
What You Get: 2 rolls 16.4ft/5M RGB LED strip, 12V/5A power supply, IR box controller, 44 key remote control.
No other accessories are required.
Please clean the surface before stick on the strip and make sure that the paste is successful by one time, otherwise, the stickiness will become weak after repeated use, and you need to add back glue again.
Please don’t stick the lights to the metal surface that conductive. It may cause a short-circuit on the strip lights.
Don’t let them on the spool when you testing them for more than 2 minutes. They need to dissipating heat.
The ventilation must be ensured. These lights need an excessive amount of airflow for cooling.
Please notice to connect the 4-pin connectors of the controller box arrow to the positive ”12V+” of lights. If not, it will don’t work.
3M Strong Self-adhesive
Please confirm your connection is correct, below is some steps need to notice:
Connect the 4-pin connectors of the controller box arrow to the positive ”12V+” of lights.
Make sure the lights are connected, and the power light up green bulb.
Pull out the transparent chip from the button of the IR remote.
Use the IR remote turn on the lights (IR remote aim at the IR receiver).
About DIY function, Please follow the steps below：
Step 1: Turn on the lights. Press one of the RGB buttons. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: If you need deeper red color, press and hold the red up button(at least 5 seconds), the longer you hold, the deeper red color you have. You can also press green and blue down, the changing will be more clearly. Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs.
3M Strong Self-adhesive
3M adhesive is stronger than other blue adhesive and lets you place the LED strip almost anywhere, including on the back of TVs, tables, cabinets and windows.
TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood.
If you have any problems or questions about how to use the lights our professional service team can provide assistance within 24 hours.
LED Strip Lights Kit
32.8Ft Led Strip Lights
SMD: 5050 300 leds
44 Keys IR Controller Remote
RGB controller box
44 keys IR remote
Control distance: 5M (must be poniting at the sensor without any obstacles)
Input: 100-240V AC 50/60Hz
Max Current: 5A
Max Wattage: 60W
Used for kitchen, they are stick well on cabinets and walls.
Used for living room decoration for backlight, under desk, behind TV,
The lights can use for home lighting. Long life span and low voltage. It is suitable for lighting the bedroom,
WIDELY USE: The led light strip are suitable for bedroom, ceiling, kitchen, cabinet, car, living room, tv, party, christmas or wedding indoor.
STRONG ADHESIVE: Our led strip lights(2 rolls 16.4ft) are used super sticky 3M adhesive, so ensure the lights stick on the suitable place for one time, and test the led strip lights before installation, please notice to connect the white controller box’s 4-pin port arrow to positive ”12V+” of lights. every roll lights has one connector to link with controller box, so they should be attached in parallel, not in series.
LED LIGHTS FEATURES: Ultra bright and high-quality LED chips allows the LED lights to be very colorful and durable. The remote can dim the LED light strip and offer millions different colors and modes by IR remote.
COLOR CHANGING LIGHTS: The RGB LED strip lights is non-waterproof colorful lights for bedroom, tv, desk, computer indoor. We don’t suggest that extend more longer lights over the kit.
DIY RGB COLORS: Put on the ultimate light show with our DAYBETTER stunning 20-color led light strips, which can be set to multiple engaging and vibrant lighting patterns (jump, fade, flash etc.). Host the perfect dinner get-together with a cozy, warm glow and turn the led light to vibrant when get the crazy party started. Built-in 20 default colors and DIY customized colors function allows you to achieve unlimited possibilities.